Что такое лист GP? Оцинкованный гладкий лист: характеристики и применение

Luyuan Steel Technical Team | Product Specification & Export Documentation | Published: August 14, 2026

GP sheet means galvanized plain sheet: flat, uncorrugated, zinc-coated steel sold as sheet or coil. It is a regional trade term, not a standard designation. Nothing about the abbreviation tells you the grade, zinc coating mass or thickness, which is why a GP enquiry rarely returns comparable quotations.

Four letters that describe the same family

Buyers meet these abbreviations in different markets, often within the same tender document:

Термин	Full form	What it actually specifies	What it leaves open
GP	Galvanized plain	Zinc-coated, flat, uncorrugated form	Grade, coating mass, thickness, width, surface
GI	Galvanized iron	Zinc-coated steel, any form	Form, plus everything GP leaves open
GC	Galvanized corrugated	Zinc-coated, roll-formed into a corrugated profile	Profile geometry, pitch, depth, plus base material spec
GL	Алюмоцинк / aluminium-zinc coated	Aluminium-zinc alloy coating rather than pure zinc	Coating class, grade, thickness

GP and GI are frequently used interchangeably in South Asian, Middle Eastern and East African trade. The practical distinction is form: GP is the flat product before profiling, GC is what a roll-former produces from it. A distributor buying GP is buying input material; a distributor buying GC is buying a finished roofing product with a fixed profile.

GL sits in a different category entirely, because the coating chemistry differs. Substituting an aluminium-zinc product against a zinc specification changes corrosion behaviour at cut edges and in contact with alkaline materials, and it changes price. If a quotation answers a GP enquiry with a GL product, that is a substitution, not an equivalent.

Why importers keep receiving unusable quotations

Send “GP sheet, 500 tons” to five suppliers and you will receive five prices that cannot be compared. The reason is arithmetic rather than dishonesty. Zinc coating mass alone moves cost across the entire tonnage, and the spread between a light and a heavy coating class is large enough to swallow any negotiated discount.

Compared with the trader listings that dominate this search term, where a product is described by little more than the abbreviation and a price per kilogram, an import contract needs four numbers fixed before price means anything: base metal thickness, zinc coating mass, grade with its standard, and width. Two of those four are where quotations quietly diverge.

Zinc coating class: three notations, one measurement

The most common cause of a rejected shipment on this product is a coating figure read in the wrong system. Three notations are in active use, and all three describe total coating mass across both surfaces:

Система	Стандарт	Notation	Approximate g/m² total, both surfaces
Европейская	EN 10346 (CEN)	Z100, Z120, Z275	The number is the g/m² figure directly
Японская	JIS G3302 (JISC)	Z08, Z12, Z18, Z27	Multiply by 10; Z12 ≈ 120 g/m², Z27 ≈ 275 g/m²
Американская	ASTM A653/A653M	G30, G40, G60, G90	Triple-spot in oz/ft²; G40 ≈ 120 g/m², G90 ≈ 275 g/m²

Read that table across one row and the point becomes obvious: Z120, Z12 and G40 describe roughly the same coating. A buyer who receives an offer quoting “Z12” against a Z120 requirement, and reads it as one tenth of what was asked, rejects correct material. A buyer who reads “G90” as heavier than “Z275” pays for a difference that does not exist.

State the notation system in the enquiry, and require the MTC to report coating mass in the same system with the unit written out. One sentence removes an entire category of dispute.

Coating mass also has a physical consequence that catalogue tables do not show. Heavier zinc coatings sit thicker on the surface, which affects tight bending, deep drawing and welding behaviour. Specifying Z275 for a component that will be formed to a small radius can produce coating flaking at the bend, so the coating class should follow the exposure environment and the forming severity together, not the environment alone.

What Luyuan publishes, and where the band ends

Товар	Grade on listing	Thickness (mm)	Zinc coating on listing
Рулон GI	DX51D / SGCC	0.18–0.30	Z120
Рулон из алюмоцинка (Galvalume)	S350GD	0.21–0.50	AZ150 (category page lists Z121–Z180)
PPGI / PPGL Coil	DX51D+AZ	0.21–0.50	Coating weight customisable at service level

The published GI band is thin material: 0.18–0.30 mm, at Z120. That range covers light roofing sheet, ceiling and partition components, ducting, packaging strapping applications and general light fabrication. It does not cover structural decking, heavier fabricated sections or components requiring a heavy zinc reserve.

Application-level pages elsewhere on the site reference zinc coating ranges up to Z275, which is the class typically specified for agricultural structures, humid environments and longer unpainted service life. Since Z275 is not printed on the GI coil product listing, treat it as an available option to confirm rather than a catalogue guarantee. Custom thickness, width and coating weight are supported at the service level, so a requirement outside the published band belongs in the enquiry.

For distributors carrying stock, this matters commercially. A warehouse holding only Z120 in 0.18–0.30 mm serves one segment. Adding a heavier coating class or a wider thickness band opens agricultural and industrial buyers, and that decision is a stocking question rather than an availability question.

DX51D and SGCC are two designations, not one

The GI coil listing carries both. They come from different standards families and are not automatically interchangeable in a contract.

	DX51D	SGCC
Standard family	EN 10346 (CEN)	JIS G3302 (JISC)
Position in the family	Lowest forming grade, general bending and roll forming	Commercial quality, general purpose
Guaranteed yield strength	Not specified as a design value	Not specified as a design value
Coating notation used alongside	Z100, Z120, Z275	Z08, Z12, Z27
Where buyers meet it	European-referenced specifications, Middle East and Africa tenders	Japanese-referenced specifications, Southeast Asia

Both are commercial forming grades and both are the correct starting point for general sheet applications. What differs is the standard the tolerances, testing and reporting follow. If a project specification names one, do not accept the other without written confirmation that the substituted grade meets the referenced standard’s requirements. ASTM International’s equivalent for hot-dip zinc-coated sheet is ASTM A653/A653M, which uses commercial steel and structural steel designations rather than either letter code above.

The line to put in a purchase order is grade plus standard together: “DX51D to EN 10346” or “SGCC to JIS G3302.” A grade letter alone is a category, not a specification.

Surface condition, and the defect that appears in transit

Surface is the parameter importers specify least and complain about most.

• Regular spangle shows the crystalline zinc pattern; minimised and zero spangle produce a more uniform surface. Anything that will be painted, powder coated or used where appearance is visible should specify the spangle requirement, because paint over regular spangle can telegraph the pattern.
• Chromate or chrome-free treatment slows white rust formation during shipping and storage. State whether passivation is required and whether chrome-free is mandatory for your market.
• Protects during transit but must be compatible with downstream processing. An oiled coil arriving at a powder-coating line creates a cleaning step nobody budgeted.
• Skin pass.Improves flatness and surface uniformity, relevant where the sheet is visible or will be painted.

White rust is the failure that generates the most claims on this product, and it is largely a packaging and storage outcome rather than a material defect. Zinc corrodes into a white powdery deposit when moisture is trapped between tightly wound coil laps or stacked sheets. Sea freight with condensation cycles is a common trigger. Specify the packing method, require moisture-barrier packing where the voyage is long or the destination humid, and state on the contract that coils must be stored under cover and ventilated on arrival. Luyuan states 100% инспекция перед отгрузкой and batch traceability from furnace number through to shipment, which gives a documented reference point if condition is disputed at destination.

What belongs on an importer’s purchase order

1. Form and product name: galvanized plain sheet or coil, and whether the material will be re-slit or profiled after arrival.
2. Grade with standard: “DX51D to EN 10346” or “SGCC to JIS G3302.”
3. Base metal thickness in mm plus tolerance, with the words “excluding zinc coating.”
4. Zinc coating mass with the notation system stated: “Z120 per EN 10346, g/m² total both surfaces.”
5. Ширина, а для рулонов — внутренний диаметр и максимальный вес рулона, допустимый для вашего погрузочно-разгрузочного оборудования. Для листов — длина и допуск на прямоугольность.
6. Состояние поверхности: тип блестки, пассивация, промасливание, дрессировка.
7. Упаковка: требования к влагозащитному барьеру, ориентация оси рулона и включена ли экспортная морская упаковка в указанную цену.
8. Документы и инспекция: сертификат заводских испытаний (MTC) на английском языке с указанием химического состава и механических свойств, упаковочный лист и данные назначенной вами инспекционной организации. Принимаются SGS, Bureau Veritas, Intertek или назначенный покупателем инспектор.
9. Классификация по ТН ВЭД. Плоский стальной прокат с цинковым покрытием шириной 600 мм и более обычно относится к товарной позиции ТН ВЭД 7210, а более узкий материал — к 7212, при этом подсубпозиция зависит от способа нанесения покрытия и дальнейшей обработки. Уточните точный код у своего таможенного брокера до отправки судна, поскольку пошлины и любые меры торговой защиты привязаны именно к коду, а не к торговому наименованию.

Пункт 9 — это то, что отличает импортеров от конечных потребителей. Неправильная классификация партии GP чревата расходами на уплату пошлин, способными превысить всю выторгованную маржу по заказу.

Часто задаваемые вопросы

В: Лист GP — то же самое, что лист GI?

О: В большинстве случаев да, с одним отличием: GP означает именно гладкий, негофрированный лист, а GI — более широкий термин для стали с цинковым покрытием в любой форме. Ни одно из сокращений не определяет марку, массу покрытия или толщину.

В: Чем отличаются листы GP и GC?

О: GC — гофрированный лист, получаемый профилированием плоского оцинкованного листа. GP — это плоский материал до этого этапа. Покупатели GP обычно приобретают сырьё для собственной профилирующей линии.

В: Какое цинковое покрытие Luyuan указывает для рулонов GI?

О: В текущем каталоге — Z120, марки DX51D или SGCC, толщина 0,18–0,30 мм. На других страницах о применении упоминаются покрытия до Z275 — их нужно подтверждать по конкретному заказу, а не предполагать.

В: Означает ли Z275 более толстый стальной лист?

О: Нет. Z275 означает массу цинкового покрытия примерно 275 г/м² на обеих сторонах, а не толщину стали. Толщина основного металла и масса покрытия — два независимых параметра, и оба должны быть указаны в спецификации.

В: Почему оцинкованный рулон пришёл с белыми пятнами?

О: Скорее всего, это белая ржавчина (белый налёт) от влаги, оказавшейся внутри при перевозке или хранении, а не дефект покрытия. Контроль обеспечивают пассивация, влагозащитная упаковка и хранение в закрытом проветриваемом помещении по прибытии. Укажите все три меры в контракте.

В: Какой сертификат прилагается к материалу?

О: К поставкам прилагается полный сертификат испытаний завода (MTC) на английском языке. Сертификаты компании: ISO 9001, ISO 14001, ISO 45001 и RoHS, полученные в 2018 году. Номера сертификатов по отдельным позициям публично не размещаются — их следует запрашивать по конкретному заказу.